User Manual Q&AAnswer
Feb 21, 2025 - 04:35 AM
To connect the to your home network, follow these steps:
1. Ensure that you have a stable Wi-Fi network available at the installation location of the camera.
2. Power on the camera by connecting it to a power source using the provided power adapter.
3. Download and install the Tenda Life app on your smartphone or tablet from the App Store (for iOS) or Google Play Store (for Android).
4. Open the Tenda Life app and create a new account or log in to your existing account.
5. Tap the "+" icon on the app's home screen to add a new device.
6. Select "Camera" from the device list and choose the CT3 Outdoor Wi-Fi Camera.
7. Follow the on-screen instructions to put the camera into pairing mode. This usually involves pressing and holding the reset button on the camera for a few seconds until the LED indicator starts flashing.
8. Once the camera is in pairing mode, the app will prompt you to connect your smartphone or tablet to the camera's Wi-Fi network. Go to your device's Wi-Fi settings and connect to the network named "Tenda-XXXX" (XXXX represents the last four digits of the camera's MAC address).
9. Return to the Tenda Life app and wait for the camera to be detected. Once detected, tap on the camera's name to proceed.
10. Enter your home Wi-Fi network's SSID (name) and password when prompted. The camera will then attempt to connect to your home network.
11. Wait for the camera to establish a connection with your home network. This may take a few minutes.
12. Once the camera is successfully connected to your home network, you can customize its settings, view live video feeds, and access other features through the Tenda Life app.
Please note that the above steps are a general guide, and the exact process may vary slightly depending on the firmware version of your camera and the Tenda Life app. For more detailed instructions and troubleshooting information, refer to the Tenda CT3 Outdoor Wi-Fi Camera Installation Guide provided with the product.
Add New Comment