How do I assemble the Kindermann 4004 000 200 Mobile Stand? (Kindermann 4004-000-200 Mobile Stand Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 04:21 AM


To assemble the Kindermann 4004 000 200 Mobile Stand, please follow these steps:

1. Ensure that assembly is done by qualified persons only.
2. Make sure the stand is used with flat screen monitors intended for it, in closed, straight, level, and dry rooms. The display must not exceed a weight of 100 kg and the size of 86 inches.
3. Refer to the instructions of the display to be mounted and follow them.
4. During assembly, take care not to overtighten the screws and damage the thread. Do not use a defective thread for assembly.
5.  xxxx  the  xxxx -sets into the thread of the display at least 3-5 turns. Refer to the manufacturer's instructions in the documentation of the respective display.
6. Be cautious of the risk of tripping during operation and behind the rolling stand during installation and setup due to its geometry.
7. Lay the cables to the device in a way that they do not pose a risk of injury and cannot be damaged.
8. During transport, ensure that the rolling stand does not tip over, especially when driving over floor sleepers on doors or elevators.
9. After placing the display stand at the installation site, make sure that the locking devices of the two front swivel castors are fixed to ensure a safe stand.

Please refer to the Kindermann 4004 000 200 Mobile Stand Instruction Manual for more detailed instructions and illustrations.