User Manual Q&AAnswer
Feb 21, 2025 - 04:21 AM
To change the gas type on the Cointra CETI 12 Gas Heater, you will need to follow these steps:
1. Close the gas shut-off valve.
2. Use a gas conversion kit specific to the gas type you want to change to. These kits can be purchased separately.
3. Disconnect the heater from the power supply.
4. Remove the burner collector and install the new one according to the instructions provided with the conversion kit.
5. Reconnect the heater to the power supply.
6. Open the gas shut-off valve.
7. Adjust the FA parameter on the control panel to match the new gas type. Refer to the parameter list in the manual for the correct value.
8. Calibrate the gas valve according to the instructions provided in the manual.
9. Confirm and exit the parameter adjustment mode on the control panel.
10. Place the new gas type label on the heater cover to indicate the gas type change.
Please note that these steps should be performed by a qualified technician in accordance with local regulations and safety guidelines. Always refer to the instruction manual for detailed instructions specific to your model.
Add New Comment