Answer

Feb 21, 2025 - 04:18 AM
To install the Lucande 3 Lights Ceiling Lamp, please follow these steps:
1. Carefully unpack the product and ensure that all parts are complete and undamaged. Do not use the lamp if there is any damage to the cable, glass, or electrical parts. Contact the service address provided in the manual if you notice any damage.
2. Before starting the installation, make sure to comply with the national installation and safety regulations for your area.
3. Familiarize yourself with the installation sketch provided on page 9 of the manual. It will give you important information about the intended use and installation requirements of the lamp.
4. The lights are not suitable for direct installation on normally flammable surfaces. Only install the lamp on non-combustible surfaces.
5. Ensure that the smallest distance to illuminated areas is maintained as indicated in the installation sketch.
6. If you are not trained in the electrical trade, it is recommended to have the electricity supply connected by a trained electrician. Do not work on the lamp if a voltage is applied.
7. If you notice any damaged electrical cables, have them replaced by a trained electrician.
8. Once the lamp is properly installed, it is important to note that the light sources are not intended to be replaced by the user. Contact a professional if the light sources need to be replaced.
Please refer to the complete instruction manual for any additional information or specific details regarding the installation process.
Add New Comment