User Manual Q&AAnswer
Feb 21, 2025 - 04:19 AM
To set the temperature set point on the Danfoss AK-RC 204B, 205C Walk-In Cooler Temperature Controls, follow these steps:
1. Press the "SET" button once to display the current temperature of probe S2 (if enabled) for 10 seconds.
2. Press and hold the "SET" button for 3 seconds to start the temperature set point setting.
3. Use the arrow keys to adjust the temperature set point to the desired value.
4. Press the "SET" button again to save the changes and exit the temperature set point setting.
Please refer to the user guide for more detailed instructions and information on other features and settings of the temperature controls.
Add New Comment