How do I install the Miele TX0917 Built-in Micro Oven? (Miele TX0917 Built In Micro Oven Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 04:17 AM


To install the Miele TX0917 Built-in Micro Oven, please follow these steps:

1. Ensure that you have the correct building-in dimensions for your oven. The dimensions are given in millimeters in the instruction manual.

2. If you are installing the oven underneath a cooktop, make sure to also follow the installation instructions for the cooktop and consider the building-in height required for the cooktop.

3. Connect the mains cable from the oven to the electricity supply. The oven is equipped with a mains connection cable and plug for connection to a 50 Hz, 230 V supply. The fuse rating must be at least 16 A.

4. Push the oven into the housing unit and align it properly.

5. Open the oven door and use the screws provided to secure the oven to the side walls of the housing unit through the holes in the oven trim.

Please note that all electrical work must be carried out by a suitably qualified and competent person in strict accordance with national and local safety regulations. Ensure that the plug and switch are accessible at all times. If the appliance is hardwired or if the switch is not accessible after installation, an additional means of disconnection must be provided.

If you have any further questions or concerns regarding the installation of the Miele TX0917 Built-in Micro Oven, please refer to the instruction manual or contact a service technician authorized by Miele.