User Manual Q&AAnswer
Feb 21, 2025 - 04:16 AM
To install the Paul Neuhaus 4072-55 Table Lamp, please follow these steps:
1. Ensure that the lamp is unplugged and the power switch is in the off position.
2. Locate a suitable location for the lamp on a flat surface.
3. Insert the G9 bulb (max. 28W) into the lamp socket. Make sure to handle the bulb with care and avoid touching the glass surface with bare hands.
4. Connect the lamp to a 230V/50Hz power source using the provided power cord.
5. Once the lamp is properly connected, you can switch it on using the power switch.
If you have any technical questions or require further assistance during the installation process, please refer to the batch number (xxXXXX-XX-XX-XXXXX-XXX) found on the rating label. You can contact Paul Neuhaus GmbH directly at the following address:
Paul Neuhaus GmbH
Olakenweg 36
59457 Werl
Germany
Please consult the instruction manual for additional information and safety guidelines.
Add New Comment