How do I install the Parmco FS60WR4, FS60WR8 Coil Freestanding Range? (PARMCO FS60WR4 FS60WR8 Coil Freestanding Range Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 04:12 AM


To install the Parmco FS60WR4, FS60WR8 Coil Freestanding Range, please follow the instructions provided in the installation section of the instruction manual. Here is a step-by-step guide:

1. Before installation, make sure the location is suitable for the range and meets all the requirements specified in the manual.

2. Ensure that the power supply and gas connections (if applicable) are properly installed and meet the necessary regulations and codes of practice in New Zealand.

3. Remove all packaging materials from the range and inspect it for any visible damage.

4. Place the range in its desired location, ensuring that there is enough clearance around it for proper ventilation.

5. Adjust the leveling legs of the range to ensure it is stable and level.

6. Connect the range to the power supply and gas source (if applicable) using the appropriate connectors and following the instructions provided in the manual.

7. Once the connections are made, check for any gas or electrical leaks. It is recommended to have a qualified technician perform this check.

8. After installation, refer to the operating instructions section of the manual to familiarize yourself with the functions and features of the range.

Please note that these are general installation guidelines, and it is important to refer to the specific instructions provided in the manual for your model (FS60WR4 or FS60WR8) to ensure proper installation and safety.