User Manual Q&AAnswer
Feb 21, 2025 - 03:57 AM
To charge the battery for the MEEC TOOLS 019799 12V Compact Reciprocating Saw, follow these steps:
1. Connect the battery to the charger.
2. Plug in the charger to a power outlet. The red charge status light will turn on.
3. Wait until the battery is fully charged. The green status light will turn on.
4. Once the battery is fully charged, replace it in the product.
Note: The charger must be switched off for at least 15 minutes between charges. Make sure to pull out the plug from the power point.
It is important to charge the battery within the recommended temperature range of 10 to 40°C. If the product has not been used for some time, check the battery charge status at regular intervals. The optimum charge for storage is between 50 to 80%. Store the tool in a dry place with a temperature range of 0 to 50°C.
Please refer to the "PREPARATIONS" section of the instruction manual for more detailed instructions and safety precautions regarding battery charging.
Add New Comment