How do I install the astro Kos Square 100 LED Ceiling Lamp? (ASTRO Kos Square 100 LED Ceiling Lamp Instruction Manual)

Answer

manuals.plus

Feb 21, 2025 - 03:55 AM

To install the astro Kos Square 100 LED Ceiling Lamp, please follow the instructions provided in the manual. Here is a step-by-step guide:

1. Before starting the installation, ensure that the power supply is switched off at the mains.

2. Identify the electrical wires in your ceiling. The live wire is normally brown or red, the neutral wire is normally blue or black, and the earth wire is normally green or yellow.

3. Connect the live wire from the ceiling to the live wire of the ceiling lamp. This is typically done by twisting the wires together and securing them with a wire connector or electrical tape.

4. Connect the neutral wire from the ceiling to the neutral wire of the ceiling lamp using the same method as above.

5. Connect the earth wire from the ceiling to the earth wire of the ceiling lamp using the same method as above.

6. Once the electrical connections are secure, carefully mount the ceiling lamp onto the ceiling using the provided installation hardware. Make sure to follow the specific instructions for your particular model.

7. After the lamp is securely mounted, restore power to the circuit by switching it back on at the mains.

8. Test the functionality of the ceiling lamp by turning it on and off.

Please note that this is a general guide, and it is important to refer to the specific instructions provided in the astro Kos Square 100 LED Ceiling Lamp Instruction Manual for your particular model. If you are unsure or have any concerns, it is recommended to consult a qualified electrician for assistance.