User Manual Q&AAnswer
Feb 21, 2025 - 03:23 AM
To adjust the cable length for the AURORA EN-SU1230B 40W Suspended LED Panel, please follow the instructions below:
1. Ensure that the power is turned off before making any adjustments.
2. Locate the cables that are connected to the LED panel.
3. Identify the adjustable cable length mechanism, which is usually located near the ceiling or mounting point.
4. Depending on the design of the mechanism, there may be a locking mechanism or a set of screws that can be loosened to adjust the cable length.
5. Loosen the locking mechanism or screws to release the tension on the cables.
6. Adjust the length of the cables to the desired height by pulling or releasing them.
7. Once the desired length is achieved, tighten the locking mechanism or screws to secure the cables in place.
8. Double-check that the cables are securely fastened and there are no loose strands.
9. Finally, turn on the power to the LED panel and ensure that it is functioning properly.
Please note that it is important to have a qualified electrician perform the installation and adjustment of the cable length to ensure safety and compliance with wiring regulations.
Add New Comment