User Manual Q&AAnswer
Feb 21, 2025 - 03:22 AM
To connect the Yeastar P-Series PBX System and Yeastar TG400 GSM Gateway, you need to follow these steps:
1. Create a SIP peer trunk on the Yeastar P-Series PBX System:
- Log in to the PBX management portal and go to Extension and Trunk > Trunk.
- Click on "Add" to create a new trunk.
- Configure the trunk settings, including the name, trunk status, ITSP template, trunk type, transport, hostname/IP, and port.
- Enter the IP address of the Yeastar TG400 gateway as the hostname/IP and the SIP port of the gateway.
- Click "Save and Apply" to save the settings.
2. Create a SIP peer trunk on the Yeastar TG400 Gateway:
- Log in to the gateway web interface and go to Gateway > VoIP Settings > VoIP Trunk.
- Click on "Add VoIP Trunk" to create a new trunk.
- Configure the trunk settings, including the trunk type, type, provider name, hostname/IP, and port.
- Enter the IP address of the Yeastar P-Series PBX System and the SIP port as the hostname/IP.
- Click "Save and Apply Changes" to save the settings.
3. Wait for a few seconds and check the trunk status on both the PBX and gateway to ensure they are connected.
Please refer to the installation guide for more detailed instructions and screenshots.
Add New Comment