User Manual Q&AAnswer
Feb 21, 2025 - 03:14 AM
To connect your Procella audio DA08-DSP Power Amplifier to your audio system, follow these steps:
1. Ensure that the amplifier is turned off before making any connections.
2. Use balanced XLR cables to connect the audio source to the XLR inputs on the amplifier.
3. Connect your speakers to the heavy-duty binding posts on the amplifier. Use two-wire stereo or mono speakers.
4. If you want to control the amplifier remotely, connect an RJ45 Ethernet cable to the Ethernet port on the amplifier.
5. Once all the connections are made, turn on the amplifier by flipping the power switch to the "On" position.
Note: It is recommended to use shielded cables for the lowest noise floor. If a single-ended connection is necessary, use the shortest possible cable to minimize potential noise.
For more detailed instructions and information, please refer to the "Connections" section of the Procella audio DA08-DSP Power Amplifier User Manual.
Add New Comment