Answer

Feb 21, 2025 - 02:56 AM
To assemble the Teufel Zola Gaming Headset, follow these steps:
1. Insert the top side of the cushion flap into the headphone gap, aligning the Teufel logos.
2. Grip the already inserted top part of the cushion and stretch it while inserting the bottom parts.
3. Rotate the headset and insert the remaining parts of the cushion.
4. Gently shuffle the cushion so that all parts fall into place.
5. To remove the cushion, hold the headset firmly and pull the cushion off at an angle.
For connecting the headset, follow these steps:
1. Insert the plug with the triangle on top into the cup, aligning it with the mark on the cup. Ensure alignment of both markings.
2. Insert the plug fully until it is attached.
3. Rotate the plug 90° clockwise until the line marking of the plug aligns with the marking on the cup. This will fixate the plug.
4. Align the top cover side openings with the headset and push the top cover in until you hear a click.
5. To remove the top cover, pull the braided cord outwards.
6. Insert the microphone plug with the raised part aligned with the notch in the microphone plug.
7. Adjust the boom arm mic head so that the little groove with a glossy finish points towards the mouth and is about 2-4cm away for optimal signal to noise ratio.
For connecting the headset, you can use the enclosed Dongle to connect it to a USB port on your PC for Surround Sound. Alternatively, you can connect the 3.5mm plug of the headset to a gaming controller or smartphone.
Please refer to the user manual for more detailed instructions and illustrations.https://manuals.plus/teufel/zola-gaming-headset-manual
Add New Comment