User Manual Q&AAnswer
Feb 21, 2025 - 02:48 AM
To change the accessories on the MEEC TOOLS 019798 Compact Grinding-Engraving Machine, follow these steps:
1. Apply the spindle lock and keep it locked.
2. Twist the tensioning nut until the lock engages.
3. Unscrew the tensioning nut from the thread with the spanner.
4. Remove any accessories currently attached to the machine.
5. Insert the required accessory through the tensioning nut and then put it in a bit holder that fits the shank of the accessory.
6. Apply the spindle lock and keep it locked.
7. Put the bit holder in the threaded insert and tighten the tensioning nut with the spanner.
Make sure to only use accessories and spare parts recommended by the manufacturer to ensure safe and proper usage of the machine.
Add New Comment