How do I properly install the PANGEA AUDIO DS-200 Series Speaker Stands? (PANGEA AUDIO DS-200 Speaker Stands Owner's Manual)

Answer

manuals.plus

Feb 21, 2025 - 02:46 AM

To properly install the PANGEA AUDIO DS-200 Series Speaker Stands, please follow these steps:

1. Start by unpacking the speaker stands and ensuring that all the necessary components are included.

2. Place the base plate on a flat and stable surface where you want to position your speakers.

3. Attach the support column to the base plate by inserting it into the pre-drilled holes. Make sure it is securely inserted and aligned properly.

4. If your speaker stands have adjustable spikes, you can adjust them to achieve the desired stability. xxxx the spikes into the threaded inserts on the bottom of the base plate. Adjust the spikes by turning them clockwise or counterclockwise to raise or lower the height of the stand.

5. Carefully place your speakers on top of the support columns. Ensure that they are centered and balanced on the stands.

6. If your speaker stands have optional speaker isolation pads or spikes, you can attach them to the top plate or bottom of your speakers for additional stability and vibration control. Refer to the specific instructions provided with the isolation pads or spikes for proper installation.

7. Once your speakers are securely placed on the stands, make any necessary adjustments to the height or positioning to achieve optimal sound quality and listening experience.

Please note that these installation instructions are general guidelines. For specific details and illustrations, please refer to the PANGEA AUDIO DS-200 Series Speaker Stands Owner's Manual.