How do I install the HILTI X-FCM-M Grating Fastener Disc? (HILTI X-FCM-M Grating Fastener Disc Instructions Manual)

Answer

manuals.plus

Feb 21, 2025 - 02:42 AM


To install the HILTI X-FCM-M Grating Fastener Disc, please follow these steps:

1. Prepare the grating: Ensure that the grating is clean and free from any debris or obstructions.

2. Position the grating: Place the grating in its desired position, ensuring that it is aligned correctly.

3. Insert the fastener disc: Take the HILTI X-FCM-M Grating Fastener Disc and insert it through the grating and into the substrate below. Make sure the disc is fully seated.

4. Secure the fastener disc: Using an appropriate tool, such as a HILTI impact wrench, tighten the fastener disc until it is securely fastened to the substrate. Be careful not to overtighten, as this may cause damage to the grating or fastener.

5. Repeat the process: Depending on the size and weight of the grating, you may need to install multiple fastener discs. Repeat steps 3 and 4 for each additional disc, ensuring they are evenly spaced and properly secured.

6. Verify installation: Once all fastener discs are installed, check the grating to ensure it is stable and secure. Apply pressure to different areas of the grating to test for any movement or looseness. If any issues are detected, recheck the installation and make any necessary adjustments.

Note: It is important to refer to the HILTI X-FCM-M Grating Fastener Disc's specific installation instructions provided in the product manual for any additional guidance or safety precautions.