How do I install the astro Yuma Surface 250 Indoor Downlight? (ASTRO Yuma Surface 250 Indoor Downlight Installation Guide)

Answer

manuals.plus

Feb 21, 2025 - 02:41 AM

To install the astro Yuma Surface 250 Indoor Downlight, please follow the steps outlined in the installation guide provided with the product. Here is a general overview of the installation process:

1. Before starting the installation, make sure to read the instructions carefully and familiarize yourself with the product.

2. Ensure that the electrical circuit you are connecting the downlight to does not have any inductive loads, such as magnetic fluorescent luminaires, motors, or ventilators. Inductive loads can generate voltage surges that may damage the electronic ballasts/drivers in the downlight.

3. The light source in the downlight should only be replaced by the manufacturer, their service agent, or a qualified person.

4. Take note of the wiring requirements:
- Live wire: Normally brown/red
- Neutral wire: Normally blue/black
- Earth wire: Normally green/yellow

5. This product is designed for ceiling use only. Do not install it in any other location.

6. Ensure that the downlight is installed out of arm's reach to prevent accidental contact.

7. Follow the detailed instructions provided in the installation guide for mounting the downlight securely and connecting the wiring properly.

8. Once the downlight is installed, test it to ensure it is functioning correctly before completing the installation.

Please refer to the complete installation guide provided with the astro Yuma Surface 250 Indoor Downlight for more specific instructions and safety precautions.