User Manual Q&AAnswer
Feb 21, 2025 - 02:40 AM
To pair multiple BTC-2 kits with a Russound MCA-66 or MCA-88 controller, follow these steps:
1. Disconnect the BTC-2X and BSK-2 from power.
2. Use a flathead screwdriver to set the source number on the bottom of the BTC-2X to match the controller's configured source number for this BTC-2X.
3. Connect a CAT-5 cable from the BTC-2 to the BTC-2X. Do not connect the RNET connection from the BTC-2 to the controller yet.
4. Apply power to the BTC-2.
5. Press and hold the "Pair" button on the rear of the BTC-2X for 5 seconds until the LED blinks green twice. This completes the pairing of the BTC-2X to its BTC-2.
6. Connect one of the BTC-2's available RNET ports to one of the MCA-66 or MCA-88 controller's available RNET ports or to an available RNET port on another BTC-2 that is already connected to one of the controller's RNET ports.
Note: This pairing process is necessary when using more than one BSK-2 kit with a Russound controller. If you are not using multiple BSK-2 kits or if you are using a single BSK-2 kit with your Russound controller, you do not need to perform these steps.
Add New Comment