User Manual Q&AAnswer
Feb 21, 2025 - 02:35 AM
To install the Wellis WF00095 Olivia Wall Mounted Bidet, please follow these steps:
1. Before installation, ensure that the wall is straight and read the instruction manual to familiarize yourself with the tools, fittings, and installation procedures. Check the fittings for any damage.
2. Handle the ceramic bidet gently as it is prone to damage. Avoid over-tightening the nut.
3. Make sure the water supply has been turned off before starting the installation.
4. Tools required for installation are not included, so make sure you have them ready.
5. Place the bidet in a suitable position, aligning the water outlet of the bidet with the drainage outlet. Leave enough distance for connecting the water supply pipe and drain pipe.
6. Mark the installing holes on the floor.
7. Carefully remove the bidet and drill holes according to the marked positions. Insert the expansible plastics or install 7# fixing plastic.
8. Install the faucet, water supply valve, and drain units according to the installation instructions for the fittings. Note that the water faucet is not supplied with this product.
9. Place the bidet back into the suitable position and connect the water supply valve and faucet using a soft pipe. Adjust the connecting bar as needed.
10. Align the xxxx with the plastic particle and fix the bidet onto the floor. Then cover the decoration cap.
11. Apply a layer of silicone between the bidet and the floor.
12. Once the above steps are completed, the installation is finished.
For specific dimensions and further details, please refer to the product manual.
Add New Comment