User Manual Q&AAnswer
Feb 21, 2025 - 02:32 AM
To pair the Aeotec Nano Shutter with your Z-Wave network, please follow these steps:
1. Set your Z-Wave controller into pairing mode. Refer to your controller's manual for instructions on how to do this.
2. Press the Action Button on the Nano Shutter or toggle the external manual switch once. The green LED will blink to indicate that the Nano Shutter is entering pairing mode.
3. If the Nano Shutter has been successfully added to your Z-Wave network, its RGB LED will be solid. If the pairing was unsuccessful, the red LED will be on for 2 seconds and then remain a colorful gradient. In this case, repeat the instructions from step 1.
Note: If you are using a Z-Wave gateway or other products as your main Z-Wave controller, please refer to their respective manuals for instructions on adding new devices to your network.
The complete instructions for pairing the Nano Shutter can be found in the user manual under the "Quick start" section.
Add New Comment