How do I connect my Input Device to the Taylor Circa 74 Amplifier via Bluetooth? (TAYLOR CIRCA 74 Amplifier User Guide)

Answer

manuals.plus

Feb 21, 2025 - 02:27 AM

To connect your Input Device to the Taylor Circa 74 Amplifier via Bluetooth, follow these steps:

1. Enable Bluetooth on your Input Device and make sure it is not already connected to another device.

2. Turn the volume on your Input Device to the maximum.

3. Set the amplifier Master Volume to "0".

4. Stay within 3 feet of the amplifier while attempting to connect the device.

5. Press and hold the Bluetooth button on the amplifier until the blue light starts flashing. If the light becomes solid blue, it means the amplifier is already connecting to a device.

6. On your Input Device, look for the Bluetooth device labeled "Circa 74".

7. Once the blue light on the amplifier stops flashing and remains solid blue, it means the amplifier is connected.

8. On your Input Device, select and play your audio sources, such as a streaming service or audio file.

9. Slowly increase the Master Volume on the amplifier until you hear the audio source playing on your Input Device.

10. Adjust the volume of the audio source on your Input Device using its volume controls.

To disconnect the Bluetooth connection, either follow the instructions on your Input Device to disconnect a Bluetooth device or hold the Bluetooth button on the amplifier until the blue light turns off.

Please note that the range of the Bluetooth connection may vary depending on your Input Device and any obstacles between the device and the amplifier. It is recommended to test the connected range of the Input Device before any performance.