User Manual Q&AAnswer
Feb 21, 2025 - 02:18 AM
To assemble the BOUDECH Trailer Troli-350 Garden Trolley, please follow the steps outlined in the instruction manual:
1. Fix the Handle Bracket F to the Front Axle (G) using the two Bolt/Washer/Nuts.
2. Take the Base (D) and turn it upside down so that the protruding bolts are facing upwards. Place both Axles (G/H) over the bolts, followed by the Washers, and secure them into place using the Large Nylon Nuts (K).
3. Remove the Bolt/Washer/Nut from the Hinge and insert the Handle (E) and align the holes. Take the Handle (E) and Hinge, align them to the holes on the Handle Bracket (F), and thread through the Bolt/Washer. Secure them into place using the Nut (L).
4. Turn the cart assembly onto its wheels. Take the Side Sections (B) and the End Sections (A) and secure them into place using the R-Pins (M). Make sure the brackets are on the outside of the cart for the Sides and Ends to sit flush.
5. Lift the Locking Handles to align with the slots on the Side Panels. Lower the Locking Handles to secure them.
6. Position the side support hooks equally spaced on the side of the carriage. Install the hooks using the supplied bolt and xxxx . Pass the xxxx through the mesh and secure the hook by tightening the bolt firmly.
Please refer to the instruction manual for detailed illustrations and further clarification on the assembly process.
Add New Comment