User Manual Q&AAnswer
Feb 21, 2025 - 02:13 AM
To install the MTX AUDIO X3-17-THUNDER3 3 Speaker System in your Can-Am™ Maverick X3, you will need a few basic hand tools such as a T40 Torx with driver or drill, small flat blade or pin removal tool, 19mm socket with extension and driver or drill, 15mm socket with driver or drill, 13mm socket with driver or drill, 10mm socket with driver or drill, 13mm wrench, 10mm wrench, and a 3mm Allen wrench. Additionally, if you have the RGB option, you will need a heat gun, butane torch, or lighter.
The installation process involves vehicle disassembly, so it is important to return all hardware to ensure the safety and longevity of your vehicle and audio system. It is recommended to disconnect the battery prior to starting work to avoid the risk of electric shock or equipment damage. When connecting power and ground wires, make sure to fuse the red power wire at the point where it is connected to the vehicle's battery to prevent damage in case of a short circuit.
For detailed installation instructions, we recommend watching the installation video provided by MTX Audio. You can visit http://mitk.co/NLF or scan the QR code in the manual to access the video.
If you need further assistance or have any technical questions during the installation process, you can visit mtx.com to chat with their support team, call 1-800-225-5689 to speak with an MTX Technical Support representative, or watch product videos on their YouTube channel at youtube.com/user/MTXAudioUSA.
Don't forget to register your product on mtx.com/productregistration or by scanning the QR code provided in the manual.
Add New Comment