How do I set up the TP-Link TL-WR902AC AC750 Wi-Fi Travel Router in Router Mode during travel? (tp-link TL-WR902AC AC750 Wi-Fi Travel Router Installation Guide)

Answer

manuals.plus

Feb 21, 2025 - 01:54 AM

To set up the TP-Link TL-WR902AC AC750 Wi-Fi Travel Router in Router Mode during travel, please follow these steps:

1. Switch the Mode Switch on the router to "Share ETH" mode.
2. Connect the necessary hardware from Step A to D.
3. If you are using a 3G/4G USB modem with a SIM/UIM card, plug the USB modem into the 3G/4G USB port on the router to transfer the 3G/4G signal to Wi-Fi.
4. Connect your device to the router's Wi-Fi. The default SSID (network name) and Wireless Password can be found on the label at the back of the router.
5. Check whether the Internet LED on the router is on. If it is on, you can skip to Step 6. If not, continue with the following steps.
6. Launch a web browser on your device and enter "http://tplinkwifi.net" in the address bar.
7. Create a password to log in to the router's web interface.
8. Click "Next" to start the Quick Setup and follow the step-by-step web instructions to set up the internet connection.
9. If you are unsure about your WAN Connection Type, you can click "Auto Detect" during the setup process.
10. You can customize your Wireless Network Name and Password for the 2.4GHz/5GHz wireless network during the Quick Setup, but you will need to reconnect your wireless devices to the new Wi-Fi network(s).
11. Once the setup is complete, connect your own devices to the router's Wi-Fi to enjoy the internet. The WAN/LAN port on the router functions as the WAN port in this mode.

For further assistance or troubleshooting, you can contact TP-Link Technical Support.