User Manual Q&AAnswer
Feb 21, 2025 - 01:48 AM
To install the Barmesa Pumps BP33 Submersible Sump Utility Pump, follow these steps:
1. Excavate the hole for the pump, ensuring there is a minimum recommended 8" diametrical clearance around the tank. Place fine gravel or crushed stone as bedding between the basin and the hole walls. Do not use sand or native soil as backfill.
2. Make the necessary inlet connection as required for your basin.
3. Backfill the hole with fine gravel or crushed stone. Do not use sand or native soil as backfill.
4. Connect the power cable of the pump to a 3-wire grounded Ground Fault receptacle. Do not modify the power cable in any way.
5. Ensure the pump is properly wired and lowered into the basin. Fill the system with liquid and allow the pump to operate through its pumping cycle to check for any potential problems.
Please refer to the for more detailed instructions and safety precautions.
Add New Comment