User Manual Q&AAnswer
Feb 21, 2025 - 01:43 AM
To connect your BYOD PC for video conferencing using the ClearOne Converge Huddle AV Conferencing DSP Mixer, follow these steps:
1. Ensure that your BYOD PC is connected to the same network as the Converge Huddle DSP Mixer.
2. Connect your BYOD PC to the Converge Huddle DSP Mixer using a CAT6 cable. One end of the cable should be connected to the Ethernet port on your BYOD PC, and the other end should be connected to the P-Link port on the Converge Huddle DSP Mixer.
3. Launch your preferred video conferencing software on your BYOD PC.
4. In the video conferencing software settings, select the ClearOne Converge Huddle DSP Mixer as the audio and video input/output device.
5. Adjust the audio and video settings in the video conferencing software as needed.
6. Start your video conference and enjoy high-quality audio and video using the ClearOne Converge Huddle AV Conferencing DSP Mixer.
For more detailed instructions and troubleshooting tips, please refer to the ClearOne Converge Huddle AV Conferencing DSP Mixer User Guide.
Add New Comment