User Manual Q&AAnswer
Feb 21, 2025 - 01:36 AM
To change the input type on the NE T NICD2411 PID Process Controller, follow these steps:
1. Press and hold the PRG key for 3 seconds to enter the configuration mode.
2. Use the UP/DN keys to navigate to the "Input" parameter.
3. Press the ENT key to select the "Input" parameter.
4. Use the UP/DN keys to select the desired input type (0-20mA, 4-20mA, 0-5VDC, 1-5VDC, 0-10VDC, or Frequency).
5. Press the ENT key to save the changes.
6. Exit the programming mode by pressing the PRG key.
Please refer to the NE T NICD2411 PID Process Controller Instruction Manual for more detailed instructions and information on other parameters and functions.
Add New Comment