How do I install the Neomounts NS-M1250BLACK Floor Stands? (Neomounts Floor Stands User Manual)

Answer

manuals.plus

Feb 21, 2025 - 01:34 AM

To install the Neomounts NS-M1250BLACK Floor Stands, follow these steps:

1. Install the casters: Attach the casters to the stands.
2. Attach the stands to the chassis: xxxx the stands tightly to the chassis.
3. Mount the upper side of the rod: Mount the upper side of the rod to the stands.
4. Attach the shelf to the stands: Attach the shelf to the stands.
5. Attach the VESA Plate to the screen: Attach the VESA Plate to the screen using the provided screws.
6. Install the adapter brackets: If needed, install the adapter brackets to the VESA Plate.
7. Attach the screen onto the bracket and secure it: Attach the screen onto the bracket and ensure it is securely fastened.
8. Adjust the tilt mechanism: Adjust the tilt mechanism to your desired position.
9. Adjust the mount to your desired position: Adjust the mount to your desired position and tighten or loosen the screws if necessary.
10. Optional: To disable the rotation function, turn the xxxx into the corresponding xxxx hole.
11. Run cable through the cable cover: Run the cables through the cable cover.
12. Install cable clips: Install the cable clips and run the cables through them.
13. Place the cover and adjust the mount: Place the cover and adjust the mount to your desired position.

Please note that it is recommended to read the user manual carefully before installation and follow the instructions provided. The manufacturer advises that the mount be installed by qualified personnel and at least two persons are needed to avoid the hazard of falling objects. Additionally, it is important to inspect the installation area and avoid places with high temperatures, humidity, water contact, excessive dust, and vibration. The mount should only be installed on vertical walls and the wall, ceiling, or floor should be strong enough to sustain the weight. It is also advised not to modify any accessories or use broken parts.