User Manual Q&AAnswer
Feb 21, 2025 - 01:31 AM
To add the FGKF-601 Fibaro Key Fob to your Z-Wave network, please follow these steps:
1. Make sure your main Z-Wave controller is in add mode (refer to the controller's manual for instructions).
2. Using the included keyring or a coin, open the battery cover by turning it counter-clockwise.
3. Remove the sticker protecting the battery.
4. Using the included keyring or a coin, close the battery cover by turning it clockwise.
5. Place the Key Fob near the main Z-Wave controller.
6. Click any button on the Key Fob three times.
7. The LED on the Key Fob will pulse white during the adding process.
8. Wait for the device to be added into the system.
9. Successful adding will be confirmed by the Z-Wave controller's message and a green LED color.
Please note that adding the Key Fob in Security Mode must be performed up to 2 meters from the controller. If the device is not added, you can try resetting the device and repeating the adding procedure.
For more detailed information and instructions, please refer to the FGKF-601 Fibaro Key Fob Instruction Manual.
Add New Comment