User Manual Q&AAnswer
Feb 21, 2025 - 01:29 AM
To install the base of the INNOCN 24D1Q Art Monitor, follow these steps:
1. Take the monitor out of the carton and place it on a flat surface.
2. Take out the stand and the base.
3. Tilt the stand to a certain angle to align it with the round slot of the base.
4. Attach the stand tightly to the base and rotate them clockwise to click the stand into the base.
5. Attach the assembled base and stand flatly and tightly into the slot at the lower side of the rear housing.
6. Push them upwards to click the base and stand into the rear housing.
7. Complete the final assembly.
Note: Do not put your hands in the gap between the stand and the housing to avoid injury. After the base is installed, do not hold the base to invert the monitor to avoid damage to the monitor.
For visual reference, please refer to the installation instructions provided in the user manual of the INNOCN 24D1Q Art Monitor.
Add New Comment