User Manual Q&AAnswer
Feb 21, 2025 - 01:17 AM
To assemble the HUDORA Tri Kickboard, follow these steps:
1. Start with the scooter delivered in two parts - the body and the handlebar.
2. Press in the safety push button at the lower end of the handlebar and align the handlebar with the opening on the scooter body. Make sure the logo on the handlebar points to the front while riding. You will hear a click when the safety push button locks into place.
3. To adjust the handlebar height, open the quick release and press the safety push button. Pull the handlebar stem with the grips upwards or push it down until the safety push button snaps into place at the desired position. Close the quick release to secure the handlebar.
4. If necessary, tighten the nut on the quick release clamp for a firmer fixation.
5. To transform the scooter into a transport state, press the safety push button from the bottom side of the deck. This will allow you to pull out the handlebar. There is a fold-out mount for the handlebars on the underside of the deck. Attach the handlebar there to transport the scooter compactly.
Please refer to the instruction manual for visual illustrations and additional information on assembly.
Note: It is important to ensure that all fasteners and locking parts are intact and tight before using the scooter.
Add New Comment