User Manual Q&AAnswer
Feb 21, 2025 - 01:15 AM
To join gasketed pipe using the REED PPJ Plastic Pipe Joiner, follow these steps:
1. Attach the stationary saddle on one side of the pipe.
2. Position the adjustable saddle approximately 15” (380 mm) from the end of the pipe.
3. Attach the pipe with the chain and tighten the xxxx assembly.
4. Adjust the ratchet pawls so that both arrows point in the same direction as each other and also in the same direction of the draw.
5. Draw one pipe end into the other pipe using the ratcheting device.
6. Make sure the pipe is fully seated into the other pipe, then remove the tool.
Note: The PPJ can also be used to separate gasketed pipe. To separate gasketed pipe, follow steps 1 and 2, then make sure the ratchet pawl arrows are pointed outward toward the direction of separation. Use the ratcheting device to separate the pipe.
(Source: REED PPJ Plastic Pipe Joiner Instruction Manual)
Add New Comment