User Manual Q&AAnswer
Feb 21, 2025 - 12:56 AM
To switch between different modes on the niceboy Hive Pins 3 ANC BT Earphones, follow these steps:
1. Normal Mode: The earphones are in normal mode by default, where they do not amplify or suppress the surrounding noise.
2. Ambient Mode: This mode allows the headphones to pick up and amplify sounds from the surroundings, which is useful for safety reasons when traversing the city or in traffic. To switch to Ambient mode, press and hold the right multifunction button for approximately 2 seconds. An acoustic prompt will announce the mode change.
3. ANC (Active Noise Canceling) Mode: ANC mode eliminates ambient noise by sending out a sound of the same wavelength as the incoming noise but with an inverted frequency phase. When these two waves collide, they cancel each other out. To switch to ANC mode, press and hold the right multifunction button for approximately 2 seconds. An acoustic prompt will announce the mode change.
Note: The Ambient and ANC modes have a higher power demand and may result in faster battery drainage.
Please refer to the user manual for more detailed instructions and information on the niceboy Hive Pins 3 ANC BT Earphones.
Add New Comment