User Manual Q&AAnswer
Feb 21, 2025 - 12:15 AM
To install the , please follow the steps below:
1. Power off: Before starting the installation process, make sure the power supply to the area where you will be installing the lamp is turned off. This is important for your safety.
2. Dimension: Measure the desired height at which you want to hang the lamp. Ensure that the chosen location can support the weight of the lamp.
3. Installation: The installation process may vary depending on the specific model and design of the lamp. However, the general steps are as follows:
a. Prepare the lamp: Unpack the lamp and check for any damages or missing parts. If everything is in order, proceed to the next step.
b. Mounting bracket: Attach the mounting bracket securely to the ceiling or desired location using screws and anchors appropriate for your ceiling type. Ensure that the bracket is level.
c. Wiring: Connect the lamp's wires to the corresponding wires in the ceiling using wire connectors. Follow the color-coding (usually black to black and white to white) or refer to the manual for specific instructions.
d. Secure the lamp: Once the wiring is complete, carefully lift the lamp and align it with the mounting bracket. Secure the lamp to the bracket using the provided screws or other attachment mechanisms.
4. Power on: After the installation is complete, turn on the power supply to the area and test the lamp to ensure it is functioning properly.
Please note that the above instructions are a general guideline, and it is essential to refer to the specific instruction manual provided with your QAZQA 103157 50 cm Hanging Lamp Black for detailed and model-specific installation instructions.
Add New Comment