User Manual Q&AAnswer
Feb 21, 2025 - 12:06 AM
Installation of the STAHL 243632 Cable Gland is relatively easy. Here is a step-by-step guide:
1. Ensure that you have all the necessary equipment and accessories, including the CMP-50-A2FRC cable gland.
2. Before installation, make sure to download the product certification and certificates from the manufacturer's website (www.cmp-products.com) for reference.
3. Prepare the cable by removing any outer sheath or protective layers as required.
4. Insert the cable through the cable gland, ensuring that it is centered and properly aligned.
5. Tighten the gland nut by hand until it is snug against the cable gland body.
6. Use a suitable wrench or spanner to further tighten the gland nut, ensuring a secure and watertight connection. Do not overtighten, as it may damage the cable or the gland.
7. Once the gland nut is tightened, check for any gaps or spaces between the cable and the gland body. If necessary, readjust the gland nut to ensure a proper seal.
8. Finally, verify that the cable gland is securely installed and provides the desired level of protection. Refer to the IP66 degree of protection rating for guidance.
Please note that the above instructions are a general guide. It is always recommended to refer to the manufacturer's installation guide or consult a professional if you have any specific concerns or requirements.
Add New Comment