User Manual Q&AAnswer
Feb 20, 2025 - 11:58 PM
To use LIQUI MOLY P005217 Display Cleaner, follow these steps:
1. Do not shake the bottle before use.
2. Hold the bottle upside down and apply a sufficient amount of foam onto the surface to be cleaned. You can apply the foam directly or use a clean microfiber cloth.
3. Wait for 5-30 seconds, depending on the level of contamination, to allow the foam to break up, infiltrate, and loosen the dirt on the surface.
4. After the waiting period, wipe off the loosened dirt with a soft, lint-free microfiber cloth.
5. Ensure that you use a gentle wiping motion to avoid scratching the surface.
6. Repeat the process if necessary for heavily soiled areas.
7. Remember not to store the product in the car or outside at low temperatures to prevent freezing.
It is important to note that LIQUI MOLY P005217 Display Cleaner is suitable for displays of smartphones, tablets, touchscreens, TV and PC screens, as well as most non-absorbent surfaces. It is also effective against fogging coatings on windshields.
For any further assistance or technical support, you can contact LIQUI MOLY GmbH through their phone number, fax, or email provided in the manual.
Add New Comment