User Manual Q&AAnswer
Feb 20, 2025 - 11:52 PM
To adjust the timing duration on the Altronix DL3 Door Control Timer, follow these steps:
1. Locate the timing potentiometer on the DL3 board. It is a small dial that can be turned clockwise or counterclockwise.
2. To increase the duration of the output, turn the timing potentiometer clockwise. To decrease the duration, turn it counterclockwise.
3. Start by turning the timing potentiometer fully counterclockwise to set the minimum duration (1 second).
4. Gradually turn the timing potentiometer clockwise to increase the duration. The maximum duration is 1 minute.
5. Test the timing duration by triggering the DL3 Door Control Timer and observing the output.
Note: It is important to refer to the DL3 Door Control Timer's user manual for any specific instructions or precautions related to adjusting the timing duration.
Add New Comment