User Manual Q&AAnswer
Feb 20, 2025 - 11:43 PM
To install the CANARM LFM230A18 LED Flush Mount, follow these steps:
1. Turn off the electrical power before starting the installation of the light fixture.
2. Attach the xxxx to the mounting bracket, ensuring it will clear the hole in the back of the fixture. Lock the xxxx in place with the hex nut.
3. Mount the mounting bracket to the electrical box using electrical box screws (not included).
4. Connect the ground wires (bare copper or green) from your fixture to the ground wire (bare copper or green) or ground xxxx in the electrical box.
5. Attach the black wire from the light fixture to the black wire in the electrical box. Attach the white wire from the light fixture to the white wire in the electrical box. Do not disconnect any pre-wired connections.
6. Once the wire connections are completed, carefully tuck the wires and wire nuts into the electrical box, ensuring no bare wire is visible at the wire nuts.
7. Secure the pan to the xxxx by tightening the hex nut. xxxx the finial to the xxxx .
8. Squeeze and insert the acrylic lens as shown in the manual.
Please note that these instructions are a general guide, and it is important to consult the product's instruction manual for specific details and safety precautions.
Add New Comment