User Manual Q&AAnswer
Feb 20, 2025 - 11:37 PM
To access the NQER Media Encoder via a web browser, follow these steps:
1. Connect the RIS Quad Encoder to your LAN (Local Area Network) using the Ethernet port and power the device.
2. Open a web browser on your computer.
3. In the address bar of the web browser, enter the IP address of the NQER device. The IP address can be identified using a suitable IP scanning tool or by checking the serial number and/or MAC address displayed on the device.
4. Press Enter or click Go to navigate to the device's web interface.
Note: By default, the device is set to DHCP, so it should obtain an IP address automatically from your network. If you encounter any issues with accessing the device via the web browser, make sure your computer is connected to the same network as the NQER device.
For more detailed instructions and configuration options, please refer to the User Manual provided with the product. You can find the full User Manual by scanning the QR code on the back page of the quick start guide.
Add New Comment