User Manual Q&AAnswer
Feb 20, 2025 - 11:36 PM
To adjust the stroke of the Neptronic WM110 Actuator, follow these steps:
1. Apply power to the actuator and wait for at least 10 seconds.
2. Press and release the reset button on the actuator to start the auto-stroke process. The LED on the actuator should be illuminated.
3. There are two options for adjusting the stroke:
a. Option 1: The actuator will travel in both directions to find its limit and position itself according to the demand. The LED will extinguish when the process is complete.
b. Option 2: When the desired end position is reached, press and release the reset button. The actuator will return back to its original position. You can also press and release the reset button when it reaches the original position. The LED will extinguish when the process is complete.
Please refer to the Neptronic WM110 Actuator Instruction Manual for more detailed instructions and illustrations.
Add New Comment