User Manual Q&AAnswer
Feb 20, 2025 - 11:32 PM
To install the EMOS ZD1432 LED Panel, follow these steps:
1. Ensure that the LED panel is designed for indoor use and is mounted on a solid base.
2. Check the Ingress Protection rating, which is IP20 for indoor use.
3. The LED panel comes ready for installation. It has two wires (L and N) for connection to the 230 V~ mains.
4. The device falls into class II, which means it does not require a protective conductor.
5. Mount the luminaire firmly onto a solid surface such as a wall or ceiling.
6. Connect the power cord to the mains 230 V~.
7. It is important to note that the connecting conductor should not be connected to the mains during installation. This should only be done by an authorized person.
8. Before any manipulation or servicing of the luminaire, disconnect it from AC power. This should also be done by an authorized person.
9. If any part of the luminaire is damaged, do not use it.
10. The LED chips inside the luminaire are not replaceable.
11. Do not change the inner wiring of the luminaire.
12. In case the cover is broken, do not use the luminaire and replace the broken cover with a new one immediately.
Please refer to the EMOS ZD1432 LED Panel User Manual for more detailed instructions and safety information.
Add New Comment