User Manual Q&AAnswer
Feb 20, 2025 - 11:24 PM
To attach the tips to the Labnet Labpette FX pipettor, follow these steps:
1. Make sure you have the correct tip corresponding to the model number displayed on the pipettor finger rest.
2. Position the pipettor vertically when attaching tips.
3. Press the pipettor against the tip positioned in the rack box. The suspension system will ensure even and airtight sealing of the pipet tips.
4. Hold down the tip ejector button to ensure a tighter fit of the tip.
Note: Do not attach the tips with a rocking movement, as this may damage the shaft or plunger. Never draw liquids directly into the pipettor without the tip attached.
For more detailed instructions and illustrations, please refer to the Labnet Labpette FX Single Channel Fixed Volume Pipettors Instruction Manual.
Add New Comment