User Manual Q&AAnswer
Feb 20, 2025 - 11:20 PM
To install the BURG WACHTER SA 1180 BURG Security anchor on a concrete or brick wall, follow these steps:
1. Using the anchor plate as a template, drill 2 pilot holes using a Ø 6 mm drill bit.
2. Remove the plate and re-drill the two holes with a Ø 10 mm concrete bit to a depth of 55 - 60 mm.
3. Remove the threaded bolts from the anchor fixings. Place the bolts through the holes in the anchor plate and hand tighten into the anchor fixings.
4. Insert the two anchor fixings into the prepared holes.
5. Holding the plate firmly against the wall, tighten the bolts.
6. Once fitted and checked, the top cover can be pressed firmly over the anchor plate to conceal the fixings.
Please refer to the BURG WACHTER SA 1180 BURG Security anchor User Manual for more detailed instructions and illustrations.
Add New Comment