User Manual Q&AAnswer
Feb 20, 2025 - 11:19 PM
To install the PHILIPS DUS90WHB-D Multifunction Sensor, it is important to follow the instructions provided in the manual and ensure that a qualified electrician performs the installation. Here is a step-by-step guide:
1. Tools Required: Gather the necessary tools for installation, as specified in the manual. These may include a screwdriver, wire strippers, and mounting hardware.
2. Dimension: Familiarize yourself with the dimensions of the sensor to determine the appropriate location for installation.
3. Warning: Take note of the warnings mentioned in the manual, such as not connecting inputs to mains and ensuring that DALI wires are not considered touch safe.
4. Mounting: Choose a suitable location for mounting the sensor. Ensure that it is securely attached to the desired surface, following the provided instructions and using the appropriate mounting hardware.
5. Installation Instructions: Follow the detailed installation instructions provided in the manual. These instructions may include connecting wires, configuring settings, and integrating the sensor into a home or building automation system.
6. Compliance: Ensure that the installation complies with all national and local electrical and construction codes and regulations, as well as IEC 60364 standards for home and building automation and control systems.
It is essential to refer to the specific instructions and diagrams provided in the PHILIPS DUS90WHB-D Multifunction Sensor Instruction Manual for accurate and complete installation guidance.
Add New Comment