Answer

Feb 20, 2025 - 11:16 PM
To charge the Rockin Roller 360 speaker, follow these steps:
1. Before first use, charge the speaker for 6-7 hours.
2. Connect the included power cord to the INPUT POWER port on the back panel of the speaker.
3. Plug the other end of the power cord into an external power source.
4. Flip the POWER ON/OFF switch UP to turn ON the speaker. The LED display will show "HI" and the speaker will connect to the last selected source.
5. The speaker will achieve a full charge in 7 hours while powered OFF, or 14 hours while powered ON.
6. If the speaker is fully charged, it is recommended to charge it again after 3 months if not in use, and not exceed 6 months without charging.
7. After using the speaker, it is recommended to charge it within 15 days if the battery is low.
8. To turn OFF the speaker, flip the POWER ON/OFF switch DOWN.
Note: The speaker can also be used as a power bank to charge other devices. Simply connect your device to the SV/2.1A USB port on the control panel using a USB cable (not included). The USB port is for charging only and will not make audio connections.
For more detailed information, please refer to the "Power & Battery" section of the user manual.
Add New Comment