User Manual Q&AAnswer
Feb 20, 2025 - 11:15 PM
To connect the Aqara Curtain Driver E1 to the Aqara Home app, please follow these steps:
1. Make sure you have the Aqara Home app and the Aqara Zigbee 3.0 hub installed on your device. You can download the app by scanning the QR code provided in the manual.
2. Open the Aqara Home app and tap on "Home" at the bottom of the screen.
3. Tap on the "+" icon in the top right corner to enter the "Add Device (Accessory)" page.
4. Select "Curtain Driver E1" from the list of devices and choose the hub you want to connect to.
5. Follow the instructions in the Aqara Home app to add the Curtain Driver E1. Press and hold the Setting button on the device for 5 seconds and wait for the voice prompt from the hub.
6. If you have purchased multiple Curtain Drivers, make sure to connect all of them to the Aqara Home app before proceeding with further installation.
7. If you are using double-sided curtains, connect two Curtain Drivers to the app and put them in one group for simultaneous control. Enter the main page of the Curtain Driver to be grouped, click on "..." in the upper right corner, select "Create a group for Curtains," and follow the instructions.
Once the Curtain Driver E1 is successfully connected to the Aqara Home app, you can control and manage your curtains through the app's interface.
Add New Comment