User Manual Q&AAnswer
Feb 20, 2025 - 11:11 PM
The installation process for the PHILLIPS CONNECT 77-S230 SmartPair Beacon is quick and easy. Here are the steps to install the beacon:
1. Choose a suitable location on the tractor where you want to affix the SmartPair Beacon. It is typically affixed to the tractor.
2. Ensure that the chosen location is clean and dry.
3. Peel off the protective backing from the VHB (Very High Bond) tape on the back of the SmartPair Beacon.
4. Press the SmartPair Beacon firmly onto the chosen location, making sure it is securely attached.
5. Once the SmartPair Beacon is installed, it is ready to be programmed with a unique Tractor ID number.
Please note that the SmartPair Beacon comes with a 2-minute installation time using the VHB tape provided. It is important to follow the instructions provided in the user manual for proper installation and usage.
For any further assistance or troubleshooting, you can contact Phillips Connect Technologies LLC's technical support at 1-833-213-5839 or email support@phillips-connect.com.
Add New Comment