User Manual Q&AAnswer
Feb 20, 2025 - 11:08 PM
To adjust the temperature setting on the Precision Refrigeration TBBS 600 Bottle Cooler and Glass Froster, follow these steps:
1. Press and hold the button on the controller to check the current temperature setting.
2. Use the arrow buttons to increase or decrease the temperature setting to better meet your site conditions.
3. Press the button again to confirm the new temperature setting.
For Bottle Coolers, the temperature range is designed to operate between +3°C to +15°C, with a factory preset of +5°C. The temperature setting is the cut-out (stopping) temperature, and the cut-in (starting) temperature is determined by the differential.
For Freezers, the temperature range is designed to operate between -18°C and -20°C, with a factory preset of -18°C. The temperature setting is the cut-out (stopping) temperature, and the cut-in (starting) temperature is determined by the differential.
Please note that Freezers have a maximum setting of -22°C and a minimum of -18°C.
It is important to allow the cabinet to reach its preset operating temperature before loading any produce.
Add New Comment