User Manual Q&AAnswer
Feb 20, 2025 - 11:05 PM
To access the Web UI configuration utility for the HARVEST NQDR Media Decoder, you can follow these steps:
1. Connect the NQDR device to your LAN via the Ethernet port and power it on.
2. Open a web browser on your computer.
3. Enter the IP address of the NQDR device in the address bar of the web browser. The IP address can be identified by using a suitable IP scanning tool or checking the device's serial number or MAC address (your computer must be on the same network).
4. Press Enter or click Go to navigate to the device's IP address.
5. The device is set to DHCP by default, so it should automatically assign an IP address to your computer.
6. You should now see the Web UI login page.
7. Enter the following login credentials: User: admin, Password: admin.
8. After logging in, you will have access to the Web UI configuration utility, where you can view device information, configure network settings, and perform system-related tasks.
Please note that it is recommended to change the default password after the initial login for security purposes. You can do this by navigating to the Update Password section in the System Settings of the Web UI.
For more detailed information and instructions, please refer to the HARVEST NQDR Media Decoder User Manual.
Add New Comment